Description

The ship has a total of 14watertight transverse bulkheads, respectively FR4, FR9, FR26, FR44, FR56, FR70, FR82, FR96, FR108, FR122, FR134, FR147, FR161 and FR173.2 watertight longitudinal bulkheads,2Longitudinal mud tank bulkhead. The main hull is divided into empty compartments from head to tail (6400Under the platform is the first ballast tank), sail cable tank, emergency firefighting Pump room (starboard), empty space, cargo hold (1st, 2nd, 3rd, 4th, 5th), Mud pump room, engine room, diesel tank, steering gear room above, and stern ballast tank.

Specifications

Accommodation

Certainly member: 14people

Crew quarters on raised aft deck 4room, third room, three pipe room, kitchen, spare room 3room, living room, bathroom,
Laundry room, CO2 room, storage room, pantry and inner stairway.
The living deck is equipped with chief engineer room and crew room1one, captain's room, chief engineer's room, chief officer's room, second officer's room, toilet, spare room3, battery room, charging and discharging board room and inner stairway.
The driving deck is equipped with cab, toilet and crew room2and inner stairway. compass Deck Set Signal Mast1Root and forecastle deck are equipped with bowmast and windlass equipment. Height of hatch coaming amidships in cargo hold area 1.50Meter.
This ship has3Only240LThickened plastic trash can. Divided into food (green), plastic (red), other ship waste
Garbage (blue)

Outfitting part of the cabin
Living room Single Room for Crew14The room is equipped with a bed, a kitchen, a writing desk, a chair, etc.
High armchair in cab1Handles, key boxes, binoculars boxes and flag boxes, etc.

Construction

This ship is a steel, single-deck, double-engine double-propeller, diesel-driven stern type self-priming self-unloading sand ship, sailing on the coast. In the navigation area, there are five cargo holds on the whole ship, the first floor is set on the first part, and the three deckhouses are set on the aft deck.

The ship's starboard side is equipped with auxiliary equipment such as sand suction pipelines for collection operations, and is installed in the mid-longitudinal position of the sand cargo area. A sand conveying pipe is arranged on the side, and a walk bridge is arranged above it, and a sand door and a sand and gravel conveying device are arranged at the bottom of the sand tank. This ship is on a belt The conveyor cabin is equipped with a belt conveyor, which passes through a belt transmission device composed of guide rollers and belts. At the gravel collection point Carry out short-distance sand and gravel transfer operations between construction sites.

Loading operation and use requirements
1) The specific gravity of sand and gravel loaded on this ship is1.3-1.5t/m3.
2) Automatic drainage and alarm devices are provided in the cargo hold. When the bilge water level exceeds 200mm, at least one drainage pump is to be able to start automatically. When the bilge water level exceeds 300mm, an alarm will be automatically issued in the bridge and engine room, and it can be automatically activated from the bridge and the engine room. Engine room remote start drain pump.
3) Before the sand mining operation, all kinds of sand mining equipment should be inspected, and the cargo hold bilge water system of the ship should be tested, which is in good condition and can be put into use at any time; the liquid level alarm equipment, anchoring equipment, etc., should be in good condition.
4)Before the ship sails, the loaded cargo must be trimmed strictly, and there should be no free liquid surface on the sand surface of the cargo hold. The lifting conveyor belt frame should be firmly tied to the conveyor belt shelf on the forecastle deck under the normal sailing state of the ship.

Length Between Vertical Lines: 117.20m
Depth: 9m
Deck Beam Arch: 300mm
Rib spacing cargo area (650mm), beginning and end (600mm)
Row water quantity about 15543.3t
Load goods quantity about 10734.77t
GT: 8124
NT: 4549
Freeboard: 2766mm
Minimum Freeboard: 2728mm
Frame spacing of own ship: 650mm

Between deck height (at the centerline)
Main deck to living deck: 3m
Living deck to driving deck: 2.80m
Pilot deck to compass deck: 2.80m

Outer Panel
The flat keel of this ship is 14×1800(mm)
The bottom of the ship is12mm
The side shell is12mm
Sheer strake 16mm
Sheer strake in the middle of the ship is 0.5L

Metal doors and windows
Metal Door
External weather tight single steel door to the aft deckhouse from the exposed main deck with a sill height of600mm, living deckhouse. The height of the outer sill is380mm, the height of the sill of the bridge deck is250mm.

Metal Windows
Cab Setup8There are fixed rectangular windows in the cab, and the specific dimensions are shown in the "Metal Door and Window Layout Drawing".

Metal Cover
Main deck setup5steel watertight hatch covers, specification800×800×100, the height of the hoarding 600mm.

Escalator, railing, handrail
Escalator
The outdoor inclined ladders on each deck are700×550, the indoor inclined ladder is700×500, the inclined ladder of the engine room under the main deck is 700×600, Steel inclined ladder, inclined ladder pedals are equipped with anti-skid strips, and are equipped with steel pipe handrails. The width of the steel vertical ladder except for the escape port is400, the width of other steel straight ladders is350.

Railing
The heights around the main deck, living deck, navigation deck and compass deck are1050mmbalustrades, flat steel pillars, round steel handrail.

Armrest
The inside and outside walkways of the ship are equipped with steel pipe wave and storm handrails.

Equipment

Manual order rail OK car and gourd
No.: 2
SDX-1Specification
0.99T×4.0Meter

Bench drill press
No.: 1
Model: Z512-2
Type: Desktop
Maximum drilling: φ12mm
Motor Power: 0.75KW

Grinder
No.: 1
SIST-200
2800 change/Minute
Power: 0.5KW

Vise
No.: 1
150mm

Anchor Settings
Head Anchor: Speck anchor 2 only, each anchor weighs 3780kg
First Anchor Chain: CCS3Class φ48Welded anchor chain with gear2root, total length522.5m
First Windlass: φ48Hydraulic anchor mooring combination machine2Table; with cast steel knife chain stopper2Only the guide rollers 2 Only

Towing Mooring Equipment
42mmGalvanized steel wire rope: 200m×1root, breaking force827kN;
52mmPolypropylene rope: 180m×4root, breaking load325KN;
A400with bollard:12Only;

Rudder and Steering Gear
Rudder
The ship adopts double fulcrum streamline balance rudder supported by rudder bracket.
Rudder blade area A 9.30 m2
Number of rudders 2
Aspect ratio e1.644
Balance ratio â0.278

Servo
Selected by this ship 200KN-mOne plunger type electro-hydraulic steering gear;

Tiller
The diameter of this ship's rudder stock is 240mm (below the lower rudder bearing),210mm (at tiller), choose marine # 25Forged steel

Navigation Equipment

This ship sails on maritime. The cargo to be loaded is dry sand and wet sand. The sand and gravel transported by this ship must be strictly trimmed. until it reaches the bulkhead around the cargo hold. If there is still a serious impact on the stability, then measures such as pressurizing the bag and baffle. The ship is stable meet the requirements of coastal shipping areas. The ship does not sail in ice areas in winter, and does not perform ice reinforcement.

Tooth wheel box: MG49.54 4.5425: 1

Conveyor Belt Assume Prepare Cabin Wind Machine
No.: 1
Type: Marine axial fan
Model: CZ-90B
Air volume: 36000 m3/h
Full pressure: 540Pa
Rotating speed: 1460rpm
Motor Power: 11KW

Hydraulic Steering Gear
No.: 1
Model: Fork type hydraulic steering gear
Nominal moment: 200KN.m
Steering time: 28s
Rotation angle: ±35°
Motor Power:11KWx2 match 2electric oil pump

Pyrotechnic Signal Equipment
Whole ship configuration 12An approved rocket parachute flame signal.
The whole ship is equipped with emergency escape breathing apparatus10Sets (one with accessories and one for training

Engine(s)

Self-sail Main Engine: Ningdong 2 x 1471KW
Conveyor Engine: Man L/V 32/40, 6300KW
Suction Pump: 9800 CBM/per hour

Host
No.: 2
Model: G6300ZC16B G6300ZC17B (left and right machine)
Type: Inline, four-stroke, supercharged and intercooled, irreversible marine diesel engine
Number of cylinders: 6
Bore/journey: 300/380mm
Rated power: 1471kW
Rated speed: 600r/min
Fuel consumption: 195+5%

Gearbox
No.: 2
Model: MG49.54
Nominal ratio: 4.5:1
Actual speed ratio: 4.5425:1
Transfer ability: 2.481KW/r/min
Rated thrust: 320KN

Flexible Coupling
No.: 2
Model: HGT4020
Rated torque: 40KNm
Max torque: 100KNm

Host Remote Control
No.: 1
Dual model
Electronic control

Main Diesel
No.: 2
Model: CCFJ250J-W

Diesel Engine
No.: 1
Model: WP12CD317E200
Type: Upright four-stroke, direct injection, water cooling
Continuous power: 276Kw
Rotating speed: 1500RPM
Fuel consumption: 210g/kW.h
Starting method: DC24V

Dynamo
No.: 1
Type: Marine brushless alternator
Model: SB-HW4.D-250
Power: 250Kw
Rotating speed: 1500RPM
Voltage: 400V

Main Diesel Generator Set
No.: 1
Model: CCFJ500J-W

Diesel Engine
No.: 1
Model: SC33W760CF2
Type: Upright four-stroke, direct injection, water cooling
Continuous power: 561Kw
Rotating speed: 1500RPM
Fuel consumption: 210g/kW.h
Starting method: DC24V

Dynamo
No.: 1
Type: Marine brushless alternator
Model: SB-HW4.D-500
Power: 500Kw
Rotating speed: 1500RPM
Voltage: 400V
Frequency: 50Hz

Parking Generator Set
No.: 2
Model: CCFJ100J-W

Unloading Deliver Machine Drive move Diesel Engine
No.: 1
Model: G6300ZC16B
Type: inline, four-stroke, supercharged and intercooled, irreversible marine diesel engine
Number of cylinders: 6
Bore/journey: 300/380mm
rated power: 1471kW
Rated speed: 600r/min
Fuel consumption: 195+5% g/kW.h
Fuel: 0#Light diesel oil
Oil consumption rate :0.8g/kW.h
Start mode: Gas start
Oil pan form: Dry oil pan
Rotation (face to the flywheel end of the main engine): Clockwise

Unloading Firewood Oil Machine and Suck Sand Pump Firewood Oil Machine Remote Control Manipulator
No.: 1 each set
Electronic control

Unloading Deliver Machine Drive move Clutch Reduction Gearbox
No.: 1
Type: clutch reduction gearbox
Model: MG45.49
Nominal ratio: 2.5:1
Actual speed ratio: 2.5510:1
Transfer ability: 3.504KW/r/min

Belt Gear Reducer
No.: 1
Model: A220
Nominal ratio: 3.31:1

Belt Conveyor Deliver Pack Set tie
No.: 1
Active Roller: ∅1600
Main Ancillary
Active Roller: ∅1600
Steering wheel: ∅1600
Tension and steering rollers: ∅420
Conveyor Tape: Width 2000mm
Length: Approx. 250m, it needs to be verified by the actual ship. Groove idler, grooved idler, ∅89

Sand Pump Drive Move Firewood Oil Machine
No.: 1
Model: STX-MAN 14V32/40
Type: Vtype,14Cylinder, 4-stroke, worm Turbocharged, intercooled
Bore x Stroke: 320×400
Fuel consumption rate under calibration conditions: 184g/kW.h(Tolerance+5%)
Continuous power: 6300KW
Rotating speed: 750RPM
Start mode: Air motor start

Sand Pump
No.: 1
Type: Horizontal mud pump
Flow: 9800m3/h
Head: 140m
Suction lift: 8m
Matching coupling

Oil Separation Unit
No.: 1
Model: AY-KYDR203CD-23
Oil separation amount: 900l/h
Slag discharge method: Automatic slag discharge
Heating area: 3.5 m2
Motor Power: 2.2kW
motor model: Y100L1-4-H-B3
Electric system: 380V/50HZ

Oil Drain Pump
No.: 1
Model: KCB-55
Type: electric gear pump
Flow: 3.3 m3/h
Pressure: 0.33MPa
Rotating speed: 1400 r/min
Motor Power: 1.5kW

Fuel Transform Pump
No.: 3
Model: KCB-135
Type: Gear pump
Flow: 8 m3/h
Pressure: 0.33MPa
Rotating speed: 1420 r/min
Motor Power: 2.2kW

Oil Pre-Supply Pump
No.: 3
Model: KCB-55
Type: electric gear pump
Flow: 3.3 m3/h
Pressure: 0.33MPa
Rotating speed: 1400 r/min
Motor Power: 1.5kW

Cabin Ventilator
No.: 2
Type: Marine axial fan
Model: CZ-90B
Air volume: 36000 m3/h
Full pressure: 540Pa
Rotating speed: 1460rpm
Motor Power: 11KW

Emergency Defend Pump Cabin Wind Machine
No.: 1
Type: Marine axial fan
Model: CZ-35B
Air volume: 3000m3/h
Full pressure: 260Pa
Rotating speed: 2920rpm
Motor Power: 0.75kW

Sand Suction Pump Room Fan
No.: 1
Type: marine axial fan
Model: CZ-120B
Air volume: 90000 m3/h
Full ressure: 350Pa
Rotating speed: 920rpm
Motor Power:18.5KW

Mud Pump Room Fan
No.: 1
Type: marine axial fan
model:CZ-50B
Air volume:9000m3/h
Full pressure:590Pa
Rotating speed:2920rpm
Motor Power:2.2kW

CO2 Room Fan
No.: 1
Type: Marine Small Axial Fan
Model: CWZ-200D-II
Air volume: 450 m3/h
Full pressure: 35Pa
Rotating speed: 1400rpm
Motor Power: 0.06KW

Air Compressor Unit
No.: 6
Model: WF-0.6/3
Vertical: air-cooled
Pressure: 3.0Mpa
Displacement: 36m3/h×3.0 Mpa
Motor Power: 7.5 KW

Start the air bottle
No.: 4
Capacity × indenter: 500L×3.0MPa

Miscellaneous air bottle
No.: 1
Capacity × indenter: 100L×1.0MPa

Bilge, Fire main pump
No.: 2
Type: Vertical centrifugal pump (with self-priming)
Model: CISG200-400
Flow: 260m3/h
Rotating speed: 1480r/min
Head: 56m
Motor Power: 45KW

Ballast pump
No.: 2
Type: Vertical self-priming centrifugal pump
Model: CISG200-250(I)
Flow: 400m3/h
Rotating speed: 1450r/min
Head: 20m
Motor Power: 30KW

Emergency Fire Pump
No.: 1
Type: Marine emergency fire pump
Model: 80CBZ-55
Flow: 60m3/h
Head: 55m
Diesel engine power: 20KW
Independent Diesel: Engine Drive

Cargo Hold Bilge Pump
No.: 4
Type: Horizontal self-priming mud pump
Model: ZW300-900
Flow: 900m3/h
Head: 15m
Motor Power: 55KW

Domestic Sewage Pump
No.: 1
Type: Marine crushing pump
Model: CF5-10
Flow: 5m3/h
Rotating speed: 2900r/min
Head: 0.1 Mpa
Motor Power: 1.1kW

Silencer
Host VTJZ-600: 1
Moored generator VTJZ-100: 2
Engine room generator VTJZ-150: 2
Engine room generator VTJZ-250: 1
Belt Conveyor Diesel Engine VTJZ-300: 1
Emergency bilge pump VTJZ-100: 2
Sand suction pump diesel engine VTJZ-1000: 1

Electronics

Host machine: G6300ZC16B 1471kW

Safety Equipment

Dioxide carbon extinguish fire Pack set
No.: 1
35bottle
68L
CO2 cylinder
Hose
Release valve
Check valve
Nozzle
Interlock switch
Match 3release control box

Firefighting equipment in engine room and belt conveyor equipment room
20LPortable Foam Sprayer
No.: 3
PQ8C

45 L push foam fire extinguisher
No.: 5

Portable Bubble foam extinguish fire device
No.: 7
MPZ9 9L

Portable Dry pink extinguish fire device
No.: 7
6 kg

Emergency escape pregnancy call Suck Pack set
No.: 4

Lifesaving Equipment
The life-saving equipment is in accordance with the "Statutory Inspection Rules for Ships and Offshore Installations" of the Maritime Safety Administration of the People's Republic of China (Domestic Navigation Sea Ship Law

Life raft living deck port and starboard
2 Only 15Popular inflatable self-righting life raft.
Forecastle deck1Only6Popular inflatable life raft.

Life jackets and buoys
The whole ship is equipped with lifebuoy10, respectively arranged on: forecastle deck2indivual(with self-illuminating light1), living deck4indivual (with lifeline2one, with self-illuminating light2), driving deck4indivual(with lights and smoke signal2), with the whole ship life jacket twenty fourpieces, immersion thermal clothing16pieces.

Rope throwing equipment
The whole ship is equipped with throwing rope4equipment (including rope throwing guns)1Supports, throwing ropes, rocket bodies and triggers 4 Only)

Fire Equipment
The whole ship is equipped with water fire extinguishing system and carbon dioxide system.

Disclaimer

The particulars and specifications are supplied by the vendor and not SeaBoats. Such information has not been verified and may be incorrect. Please do not rely on particulars and specifications unless you have verified their accuracy.

Location Map